You must make sure your printer is turned on and connected prior to printing tags. (Printer Setup Notes)
 




Tap on Stewart - Tap Here to Start.


Open the Credit section.


Select Print Setup


Select Label Format


Select Label Format Option


Tap on Tag Order, Select SRP or STD (Standard). You are now ready to scan barcodes, key in item numbers, or search for items

















Click Continue to proceed.


To scan items on the Honeywell, use either scan button on the Honeywell (You do not have to use both at the same time). The item will populate once scanned.


 

To Search for items, Tap on the Menu button (top left), Tap on Search, type in your item description, tap on the Magnifying glass button, Scroll/Swipe up through the list to locate your item or items, Tap on the white box or boxes of the item(s) you would like, Next tap on To Order, and now you can tap on the white box to increase your item quantity or the red minus to decrease your quantity (If you tap on the item and not the white box, you can enter in a designated quantity).


To remove an item, tap on the red minus button next to the item.


You can also search items by category using Order Guides. Tap on the Menu button (top left), Tap on Order Guides, Tap on the category of your choosing, Tap on the particular item group of your choosing (Gum Standard Size was chosen in the picture below), Tap on the white boxes of the items you need (If you tap on the item and not the white box, you can enter in a designated quantity), and now tap on To Order.

Once you are ready to print the tags, Tap on the Menu button, Swipe up to locate Print Tags, and tap on Print Tags.